Jump to content

Module:Location map/data/United Kingdom Dartmoor/doc

From Wikipedia, the free encyclopedia


Location map of Dartmoor
name Dartmoor
border
coordinates
50.75
-4.18 ←↕→ -3.6
50.37
map center 50°34′N 3°53′W / 50.56°N 3.89°W / 50.56; -3.89
image Dartmoor National Park UK location map.svg
image1 Dartmoor_National_Park_UK_relief_location_map.png


Module:Location map/data/United Kingdom Dartmoor is a location map definition used to overlay markers and labels on an equirectangular projection map of Dartmoor. The markers are placed by latitude and longitude coordinates on the default map or a similar map image.

Usage

These definitions are used by the following templates when invoked with parameter "United Kingdom Dartmoor":

Map definition

  • name = Dartmoor
    Name used in the default map caption
  • bottom = 50.37
    Latitude at bottom edge of map, in decimal degrees
  • left = -4.18
    Longitude at left edge of map, in decimal degrees
  • right = -3.6
    Longitude at right edge of map, in decimal degrees

Alternative map

The {{Location map}}, {{Location map many}}, and {{Location map+}} templates have parameters to specify an alternative map image. The map displayed as image1 can be used with the relief or AlternativeMap parameters. Examples may be found below or in the following:

Precision

Longitude: from West to East this map definition covers 0.58 degrees.

  • At an image width of 200 pixels, that is 0.0029 degrees per pixel.
  • At an image width of 1000 pixels, that is 0.0006 degrees per pixel.

Latitude: from North to South this map definition covers 0.38 degrees.

  • At an image height of 200 pixels, that is 0.0019 degrees per pixel.
  • At an image height of 1000 pixels, that is 0.0004 degrees per pixel.


See also

Location map templates

Creating new map definitions